Xpert Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of zeroone x6 pro flight controller in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk cheap zeroone x6 pro flight controller in stock here from our factory. Customized orders are welcome.
Built for Redundant, Reliable Unmanned System Operations

The ZeroOne X6 Pro is a high-performance industrial autopilot built on FMU v6X hardware standard, engineered for commercial and industrial unmanned platforms that demand stable, continuous flight under complex environments. Equipped with STM32H753 main MCU and STM32F103 IO MCU, this flight controller adopts triple IMU layout (IIM42653 + BMI088 + IIM42653), dual ICP-20100 barometers and RM3100 magnetometer. Built-in vibration damping structure greatly cuts gyro noise, delivering consistent attitude data for long-endurance missions.
It supports both ArduPilot and PX4 firmware, compatible with a wide range of vehicle types: multirotor, fixed-wing, VTOL, helicopter, unmanned ground vehicle and unmanned surface vessel. With wide operating temperature range (-20℃ ~ 85℃), it works reliably for outdoor, high-altitude and harsh field deployment.
Rich Expandable Interfaces & Flexible PWM Configuration
This autopilot comes with abundant peripheral ports to simplify your system integration: 2×CAN, 2×GPS, ETH, 4×UART, SBUS, SPI, I2C, AD&IO, USB and dedicated DSM/PPM input.
It provides 16 PWM outputs: 14 channels via Dupont connectors plus 2 GH1.25 expansion ports. PWM voltage can be switched between 3.3V and 5V to match different servo and ESC requirements, upgrading driving flexibility.
2 DroneCAN power ports are reserved, with servo voltage monitoring up to 9.9V. It also integrates PWM relay function for external device control, such as payload trigger, lighting or release mechanism.
Core Technical Specification
| Item | Parameter |
|---|---|
| Hardware Standard | FMU v6X |
| Main MCU | STM32H753 |
| IO MCU | STM32F103 |
| Vibration Damping | Built-in |
| IMU | IIM42653 + BMI088 + IIM42653 |
| Barometer | ICP-20100 ×2 |
| Magnetometer | RM3100 |
| PWM Relay | Yes |
| RX Protocol | SBUS / DSM / PPM |
| PWM Channels | 16 (14 Dupont + 2 GH1.25 expansion) |
| PWM Level | 3.3V / 5V switchable |
| Power Port | 2 × DroneCAN power port |
| Servo Voltage Monitor | Max 9.9V |
| Interfaces | CAN×2, GPS&Safety×1, GPS2×1, DSM PPM IN×1, ETH×1, UART×4, SBUS IN×1, USB×1, SPI×1, AD&IO×1, I2C×1 |
| Operating Temp | -20℃ ~ 85℃ |
| Weight | 94g |
| Supported Firmware | ArduPilot, PX4 |
| Supported Vehicle | Helicopter, Multirotor, Fixed-wing, VTOL, UGV, USV |
| Operating Voltage | 4.5V–5.4V |
| Dimension | 83.8 × 38.8 mm |

Mission Scenarios Where X6 Pro Excels
The redundant sensor design and multi-firmware compatibility make it a preferred autopilot solution for industrial unmanned projects.
VTOL Mapping & Survey Drones:
Stable transition between hover and forward flight, reliable for aerial survey, terrain mapping, power line inspection, pipeline patrol.
01
Heavy-lift Multirotor Platforms:
For crop spraying, cargo delivery, emergency rescue payload transport. Triple IMU redundancy reduces attitude drift during heavy load flight.
02
Fixed-wing & Helicopter Projects:
Long-range fixed-wing patrol, inspection helicopter, automated flight waypoint mission.
03
Unmanned Ground / Surface Robots:
UGV unmanned car, unmanned boat for water quality monitoring, offshore inspection, ground reconnaissance.
04
Custom R&D Platforms:
University lab research, engineering prototype testing, custom drone development with PX4 / ArduPilot secondary development.
05
Customization & Technical Support
We provide full technical support for system integration, firmware tuning and port adaptation for bulk buyers and R&D teams.
Support custom firmware configuration, parameter preset according to your airframe type (VTOL, multi-rotor, UGV etc.)
Hardware label, laser marking, packaging customization for OEM & ODM orders
Dedicated technical documentation, wiring diagram, debug guide and remote tuning support
Batch testing before shipment, consistent quality for long-term project supply
Flexible MOQ for project prototype and mass production
FAQ
Q: Which firmware can run on ZeroOne X6 Pro?
A: It supports official ArduPilot and PX4 firmware, you can flash the firmware based on your project habit.
Q: What is the advantage of triple IMU + dual barometer?
A: Redundant sensors improve flight safety. The flight controller can cross-verify attitude and altitude data, avoid single sensor failure causing flight accident, which is critical for industrial inspection and cargo drones.
Q: Can I use 5V servos and 3.3V ESCs at the same time?
A: Yes. PWM pins support 3.3V / 5V level switching, you can set different voltage levels for different channels to match your actuators.
Q: Does this flight controller work with DroneCAN ESCs?
A: Yes, it has 2 DroneCAN power & communication ports, compatible with DroneCAN peripheral devices.
Q: What is the operating temperature range?
A: -20℃ to 85℃, suitable for cold mountain area and high-temperature desert field operation.
Q: Can this autopilot be used for unmanned boat and unmanned car?
A: Absolutely. ArduPilot includes dedicated Rover and Submarine firmware, perfectly fit UGV and USV autonomous navigation.
Q: What receiver input types are supported?
A: SBUS, DSM and PPM signal input are supported.
Hot Tags: zeroone x6 pro flight controller, China zeroone x6 pro flight controller manufacturers, suppliers, factory

